MagiCut 123Flex Sublibloc White

1. What is the difference between MagiCut 123Flex Sublibloc and MagiCut 123Premium Flex Sublibloc?The difference between 123Flex Sublibloc and 123Premium Flex Sublibloc lies in the carrier. The carrier varies as follows: 123Flex Sublibloc features a less adhesive carrier, whereas 123Premium Flex Sublibloc comes with a sticky carrier.

2. When should I opt for 123Flex Sublibloc and when for 123Premium Flex Sublibloc?MagiCut 123Flex Sublibloc features a less adhesive carrier: With larger designs, a less adhesive carrier facilitates quicker peeling. Moreover, using a less adhesive carrier allows for easier stacking of transfers for printing without excessive sticking between transfers. Additionally, you can remove the carrier at a higher temperature (thus sooner). MagiCut 123Premium Flex Sublibloc comes with a more adhesive carrier: This is advantageous for intricate designs as small details adhere better to the carrier during peeling. In summary: For small, intricate designs, MagiCut 123Premium Flex Sublibloc is more convenient, whereas for large designs (and quantities), MagiCut 123Flex Sublibloc is faster and easier to work with.

3. When do I use the Sublibloc version of the MagiCut 123Flex?When printing on colored polyester fabrics, the heat during the process can cause the fabric's color pigments to slowly penetrate into the Flex print. To prevent this effect, commonly referred to as "bleeding," a special layer has been incorporated into the sublibloc flex that acts as a barrier against the pigments. Coupled with the low processing temperature of 130°C (266°F), this ensures that bleeding is no longer possible.

4. Do I always need to use Sublibloc on polyester?No, only when the print is of a light color and the fabric is of a dark color. Example 1: For a cobalt blue Flex print on a cream-colored 100% polyester softshell jacket, Sublibloc is not necessary as the color of the jacket is much lighter than the print. Example 2: When using a white Flex print on a dark red 100% polyester softshell jacket, it is advisable to use Sublibloc because otherwise, the red pigments could gradually become visible in the white Flex print.