Silhouette CAMEO PRO MK-II
The Silhouette CAMEO PRO MK-II is the latest evolution in Silhouette’s lineup of cutting machines, offering new features that elevate its functionality and ease of use. New features include a second powered carriage, a quieter operating model, and an emergency stop function. The Silhouette CAMEO PRO MK-II is equipped with enhanced loadability and additional auxiliary rollers for increased stability during operation. The introduction of new power tool capabilities, including the heat pen, expands the machine’s versatility.
The Silhouette CAMEO PRO MK-II offers a cutting width of 24 inches (60.96 cm), one of the largest on the market. Makers can bring their creative ideas to life on a larger scale, either through larger design size or the ability to cut more small designs in one go. Silhouette Stand: A Solution to Creating with Long Materials
Along with the Silhouette CAMEO PRO MK-II, Silhouette is offering a new stand to simplify the use of long materials in the creative process. The stand is compatible with the CAMEO 4 model and later. It is perfect for creating large projects in a small space, with the basket holding the material before and after it feeds through the machine, preventing the material from getting dirty and sticking to the floor. This maximizes the functionality of the Silhouette CAMEO PRO MK-II, ensuring that the user can create more with each use. The stand uses space effectively and improves efficiency for makers looking to produce a high quantity of projects quickly.
Accuracy
With improved machine stability, the Silhouette CAMEO PRO MK-II offers cutting accuracy that satisfies everyone from hobbyists to business users.
Productivity
The 24″ size and new features make it more productive. It is now even more suitable for business users.
Operability
A wider range of materials and tools are now available to create a wider variety of projects. Expand your creative possibilities.
Versatility
Users can choose from a wide range of media and tools. Expand users’ creative possibilities.
Updated Chassis
Cutting accuracy has been improved due to Silhouette New Architecture. Updated chassis for improved carriage stability and more accurate cutting. New belt drive minimizes deviation and vibration.
Supreme Cutting Proficiency
Silhouette CAMEO PRO MK-II introduces the highest cutting force. The force of Tool Holder 1 is capable of 300gf. This is an improvement of approximately 143% over the previous model.
Adaptive Sensor
The Silhouette CAMEO PRO MK-II can adjust the sensitivity of the scanning sensor depending on the material surface. This increases the ability to properly scan registration marks successfully regardless of the material type. Registration marks on materials with a lustrous surface, such as metallic, shiny, or glittery, can now be scanned by the CAMEO PRO MK-II.
Four-point registration mark
Four registration marks are now supported. Correction in the vertical and horizontal directions is now possible, so that even if a design is distorted in printing, the distortion can be corrected, and the design can be cut.
Unrivaled Speed
The maximum speed is now 400mm/s. This is an improvement of approximately 133% over previous models. The larger the material, the more effective.
Dual Cross Cut
Both auto crosscut and manual cut are provided. You can cut straight through the material at any desired position and immediately move on to the next project.
Repeat Job
Repeat a previous job at the touch of a button on the machine. When a repeat job is enabled, the load button flashes. If you press and hold this button for more than 3 seconds, the same cuts as before will be made.
Improved visibility
Pinch rollers have been modified to improve visibility. The position of the material and roller is now easier to see, making it easier to accurately set the material.
Support roller
There are now five support rollers instead of the previous two. Material can be conveyed more consistently.
Emergency Stop
It will now be possible to immediately stop a cut job if a major problem arises without losing power to the machine or having to disconnect it.
More Material Sizes
New material sizes or materials that are slightly larger or smaller than standard sizes can now be accommodated. The support rollers can be removed so that materials from 5“ to 24” can be set without mounts.
Power Carriage
The Power Carriage of the Silhouette CAMEO PRO MK-II opens up new creative possibilities by powering specialty tools. The addition of cutting-edge tools like the Heat Pen, Embossing Tool, and Pen Holder enables an exponential increase in the range of projects that can be created.
Quiet Operation
With an ultra-quiet operating noise, users can use the machine at any time and place.
Reviews
There are no reviews yet.